You will only see readers that I have tested and will recommend to you on this page Except for the Non-Supported old readers section. I was not able to figure out how to make the contactless part work, just the regular CAC slot. You can update the driver manually following this guidance. Follow guidance in this PDF. Mac friendly with this update. Download alternate Realtek driver. Not all CAC readers are created equal.

ActivClient 7.1.0.x updates. ActivClient 7.1.0.257 Hotfix - 22 November 2019. The ActivClient 7.1.0.257 can be installed on top of ActivClient CAC 7.1.0.x or any later hotfix. You can find more details about the issues this hotfix addresses in the technical description section of the Readme file associated with it.

HID® ActivID® ActivKey® USB Tokens HID Global

Readwr the driver direct from IOGear and restart computer to remedy this situation. If your Mac is having problems with this reader, you will need to update it using a Windows computer or Bootcamped Mac. If you have questions or suggestions for this site, contact Michael J. Actividentity smart card reader friendly with this update.

Mac friendly after this update except when using Firefox. I am not endorsing actividentity smart card reader particular product or vendor, I’m merely informing you what works and where you can purchase a CAC reader from. Alternate installation file installation instructions are in the.

Th is reader will show up as an SCRv2 in device manager. Some Mac actifidentity are having problems with this old reader. Follow guidance in this PDF.

Drivers & Downloads

You actividentity smart card reader purchase this reader from a lot of different vendors, but the manufacturer doesn’t list this reader on their suite to offer support. This reader has 4 possible fixes to work with Windows 7: Information from manufacturer including drivers. Mac friendly after this update. Identive formerly SCM Microsystems. The simplest solution is for you is to get a modern vendor supported CAC reader above this section.

This has worked for some people. Download patch from Microsoft.

HID® ActivID® ActivKey® USB Tokens

I have no personal preference as to who you decide to purchase from. I do not recommend you purchase this CAC reader unless you are not planning on using a computer newer than Windows XP. A Soldier could not get it to work, so, he purchased an SCR Also, due to the fact that most computers do not have serial actividentity smart card reader or use PS2 keyboards anymore, this reader is useless for modern computers.

According to the Identive’s driver download page, it will not work on anything newer than XP. They have never sent me a “How – To. Please website with your friends and colleagues. Last Update or Review: Use at your own risk!! According to the Identive’s website driver download page, it will actividentity smart card reader work on anything newer than XP.

You can update the driver manually following this guidance. Monday, actividentity smart card reader April Update ActivClient Step 5: If purchasing from Amazon, consider Amazon Prime free for 30 daysincludes free 2 day shipping and the ability to watch over 40, movies and TV shows anytime and Music Streaming.

Others are still having problems. I was not able to figure out how to make the contactless part work, just the regular CAC slot. Not all CAC readers are created equal. The manufacturers have abandoned support for these readers.

Is HuniePop available for macOS? Yes, HuniePop is available on such platforms as Windows PC, Linux, macOS, and Mac OS. Where can I download HuniePop for Linux? HuniePop is available for download on Steam for all the supported platforms. Can I download additional content for HuniePop on Steam? How to Download & Install Huniepop Click the Download button below and you should be redirected to UploadHaven. Wait 5 seconds and click on the blue ‘download now’ button. Now let the download begin and wait for it to finish. HuniePop is a unique sim experience for PC, Mac and Linux. It's a gameplay first approach that's part dating sim, part puzzle game, with light RPG elements, a visual novel style of presentation, an abrasive western writing style and plenty of 'plot'.8 gorgeous girls each with their own. Click on the link below to the official website to download the latest version of the HuniePop game. If you are Windows PC, Mac or Linux user, then just click on the button bellow to get the game. Please note that this game may ask for additional in-app purchases and permissions when installed. Download Launcher HuniePop is a unique sim experience for PC, Mac and Linux. It's a gameplay first approach that's part dating sim, part puzzle game, with light RPG elements, a visual novel style of presentation, an abrasive western writing style and plenty of 'plot'. This site is not directly affiliated with HuniePot. Huniepop mac download.

ActivClient Group Policy Objects for Computer policy and Group Policy template files are included in the SHB. ActivClient is used by those who want additional smart card login features outside of the built-in Windows smart card functionality. The most significant feature is support for reading the 'legacy edge' used by Common Access Cards. This page provides instructions how to enable support for reading the legacy edge, called the US Department of Defense configuration, and configuring the ActivClient smart card logon credential provider as the default logon credential provider in Windows.

Enabling the US Department of Defense configuration

ActivClient does not enable support for the legacy edge, called the US Department of Defense configuration, by default. This configuration change can be applied at install time and can also be configured using local or domain Group Policy.

Enabling the US Department of Defense configuration using the installer

When selecting the Typical installation option in the installation wizard the following features are enabled (e) and disabled (d) by default:

The US Department of Defense configuration feature can be enabled after selecting the Custom option when using the MSI installer user interface.

msiexec.exe can be used to facilitate automated installation of the feature. msiexec has a command line option, called ADDLOCAL, that can be used to select which features to install. Using a tool such as Orca to inspect the MSI file reveals the following MSI feature names correspond to the above feature names in the installation user interface and can be used by the ADDLOCAL option:

Use the following command to install the features that would normally be installed by selecting Typical while also including the US Department of Defense configuration feature from the installer user interface:

The US Department of Defense configuration feature from the ActivClient MSI file appears to make 3 configuration changes to the system:

1. Enables the legacy card edge
2. Enables notification of card expiration
3. Enables notification of certificate expiration

These changes map to the following registry values:

• First change:
  • HKLMSoftwareHID GlobalSecurityModuleMWDiscoveryProviderCardEdge
  • Name: DefaultCardEdge
  • Value: 1
  • Type: DWORD
• Second change:
  • HKLMSoftwareHID GlobalActivClientNotificationsCardValidity
  • Name: EnableCardValidityCheck
  • Value: 1
  • Type: DWORD
• Third change:
  • HKLMSoftwareHID GlobalActivClientNotificationsCardValidity
  • Name: EnableCertificateValidityCheck
  • Value: 1
  • Type: DWORD

Enabling the US Department of Defense configuration using Group Policy

Once the ActivClient Group Policy templates have been copied to the PolicyDefinitions folder, local and domain Group Policy editing tools can be used to enable the US Department of Defense configuration. Make 3 policy changes to enable the US Department of Defense configuration, and recreate the same settings that the installer configures, through Group Policy:

• First policy:
  1. Browse to Computer Configuration > Administrative Templates > HID Global > ActivClient > Smart Card
  2. Double click the Turn on US Department of Defense configuration policy
  3. Select the Enabled radio button
  4. Click the OK button
• Second policy:
  1. Browse to Computer Configuration > Administrative Templates > HID Global > ActivClient > Notifications Management
  2. Double click the Display Card Expiration notification policy
  3. Select the Enabled radio button
  4. Click the OK button
• Third policy:
  1. Browse to Computer Configuration > Administrative Templates > HID Global > ActivClient > Notifications Management
  2. Double click the Display Certificate Expiration notification policy
  3. Select the Enabled radio button
  4. Click the OK button

These policies correspond to the following registry values.

• Enabling the Turn on US Department of Defense configuration policy configures the following registry value:
  • Path: HKLMSoftwarePoliciesHID GlobalSecurityModuleMWDiscoveryProviderCardEdge
  • Name: DefaultCardEdge
  • Value: 1
  • Type: DWORD
• Enabling the Display Card Expiration notification policy configures the following registry value:
  • Path: HKLMSoftwarePoliciesHID GlobalActivClientNotificationsCardValidity
  • Name: EnableCardValidityCheck
  • Value: 1
  • Type: DWORD
• Enabling the Display Certificate Expiration notification policy configures the following registry value:
  • Path: HKLMSoftwarePoliciesHID GlobalActivClientNotificationsCertificateValidity
  • Name: EnableCertificatesValidityCheck
  • Value: 1
  • Type: DWORD

The provided Group Policy Object implements these 3 policies plus the policy from the Configuring ActivClient as the default logon credential provider section.

Configuring the smart card credential provider as the default logon credential provider

In addition to activating the US Department of Defense configuration option for ActivClient, administrators may want the smart card logon prompt to be the default logon prompt. Windows displays a logon prompt that prompts for a password by default but this behavior can be changed by enabling and configuring a Group Policy setting. To enable and configure the Windows 10 smart card logon credential provider through Group Policy:

1. Browse to Computer Configuration > Administrative Templates > System > Logon
2. Double click the Assign a default credential provider policy
3. Select the Enabled radio button
4. Enter the value of {8FD7E19C-3BF7-489B-A72C-846AB3678C96} in the Assign the following credential provider as the default credential provider text box
5. Click the OK button

Smart card logon will be the default logon prompt once a user has logged into the system at least one time using a smart card. If the Interactive Logon: Do not display last username Group Policy setting is enabled, then a username and password prompt will always be the default logon prompt (1,2). The Interactive logon: Require smart card Group Policy setting can be used to force the smart card credential provider to be the default logon prompt, but then only smart card logons are allowed.

Updating the ActivClient Group Policy templates

The Group Policy template files need to be copied to specific a location on the file system. The location to copy the files to varies depending on if it is a domain versus a standalone system.

Updating the ActivClient Group Policy templates for a domain

If the domain administrators have configured a Group Policy Central Store for the domain, then copy the HIDGlobal.ActivClient.admx, HIDGlobal.admx, HIDGlobal.AdvancedDiagnostics.admx, and HIDGlobal.Logging.admx files to Fully Qualified Domain NameSYSVOLFully Qualified Domain NamePoliciesPolicyDefinitions and copy the HIDGlobal.ActivClient.adml, HIDGlobal.adml, HIDGlobal.AdvancedDiagnostics.adml, and HIDGlobal.Logging.adml files to Fully Qualified Domain NameSYSVOLFully Qualified Domain NamePoliciesPolicyDefinitionsen-us

If the domain administrators have not configured a Group Policy Central Store for the domain, then copy the HIDGlobal.ActivClient.admx, HIDGlobal.admx, HIDGlobal.AdvancedDiagnostics.admx, and HIDGlobal.Logging.admx files to %SystemRoot%PolicyDefinitions, typically C:WindowsPolicyDefinitions, and copy the HIDGlobal.ActivClient.adml, HIDGlobal.adml, HIDGlobal.AdvancedDiagnostics.adml, and HIDGlobal.Logging.adml files to %SystemRoot%PolicyDefinitionsen-us folder on the domain controller.

Updating the ActivClient Group Policy templates for a standalone system

%SystemRoot%PolicyDefinitions, typically C:WindowsPolicyDefinitions, contains Group Policy templates used by Local Group Policy on a standalone system. Copy the ReaderDC.admx file to %SystemRoot%PolicyDefinitions and copy the HIDGlobal.ActivClient.adml, HIDGlobal.adml, HIDGlobal.AdvancedDiagnostics.adml, and HIDGlobal.Logging.adml files to %SystemRoot%PolicyDefinitionsen-us folder on the domain controller.

Importing the ActivClient Group Policy

Importing the ActivClient domain Group Policy

Use the PowerShell Group Policy commands to import the ActivClient Group Policy into a domain. Run the following command on a domain controller from a PowerShell prompt running as a domain administrator.

Importing the ActivClient local Group Policy

Use Microsoft's LGPO tool to apply the ActiveClient Group Policy to a standalone system. Run the following command from a command prompt running as a local administrator.